| 会员中心 |
www.164580.com/member/ |
|
| 繁體中文 |
big5.164580.com/ |
|
| 产品与标准 |
www.164580.com/biaozhun/ |
|
| 简体 |
https://www.164580.com/info_42568.html |
|
| 繁体 |
https://big5.164580.com/info_42568.html |
|
| 米/英制螺纹对照 |
www.164580.com/data/detail_7.html |
|
| GB /T 6183.2 |
www.164580.com/biaozhun/?srd=100 |
|
| ISO 12125 |
www.164580.com/biaozhun/?srd=820 |
|
| DIN EN 1666 |
www.164580.com/biaozhun/?srd=1335 |
|
| EN 1666 |
www.164580.com/biaozhun/?srd=1336 |
|
| 细牙六角尼龙法兰锁紧螺母 A级、B级 |
www.164580.com/info_8007.html |
|
| 紧固件 表面不连续性 螺母 |
www.164580.com/info_420818.html |
|
| 紧固件公差 Part1:螺栓、螺钉、螺柱和螺母 产品等级 A、B和 C级 |
www.164580.com/info_65365.html |
|
| ISO一般用途米制螺纹 基本尺寸 |
www.164580.com/info_64804.html |
|
| ISO一般用途米制螺纹--公差 part2:内螺纹和外螺纹的极限尺寸 |
www.164580.com/info_64991.html |
|
| 紧固件 验收检查 |
www.164580.com/info_65195.html |
|
| 紧固件 螺栓、螺钉、螺柱和螺母一般要求 |
www.164580.com/info_65586.html |
|
| 普通螺纹收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983) |
www.164580.com/info_369512.html |
|
| 紧固件机械性能 不锈钢和镍合金紧固件选用指南 |
www.164580.com/info_366129.html |
|
| 普通螺纹 公差 |
www.164580.com/info_411264.html |
|
| 紧固件机械性能 螺母 粗牙螺纹 |
www.164580.com/info_47260.html |
|
| 攻丝前钻孔用麻花钻直径 |
www.164580.com/info_408187.html |
|
| 普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD) |
www.164580.com/info_367846.html |
|
| 紧固件公差（螺栓、螺柱、螺钉和螺母） |
www.164580.com/info_73287.html |
|
| 镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能 |
www.164580.com/info_80257.html |
|
| 紧固件表面缺陷 - 螺母 |
www.164580.com/info_371348.html |
|
| 黑色金属硬度及强度换算值 |
www.164580.com/info_357986.html |
|
| 紧固件公差 - 用于精密机械的螺栓、螺钉和螺母 |
www.164580.com/info_371467.html |
|
| 紧固件机械性能 螺母 细牙螺纹 |
www.164580.com/info_343179.html |
|
| © 易紧通 |
www.164580.com |
|
正在请求数据,请稍候...